What are your rates?
Because there are always plenty of variables with each project, please contact me and tell me about your project in order to get a custom quote. I may have questions for you, but I will be prompt in giving you a quote and laying out some options. I'm excited to work with you!
How do you determine your rates?
For mastering, rates depend first and foremost on the total length of your project, and secondarily the number of songs. The same rate is charged for all projects up to 40 minutes, but there are special discounted rates for one or two singles. After 40 minutes, the rate incrementally increases with duration.
For mixing, rates depend on a combination of the number of multi-tracks in your songs, how many songs there are, how long they are, and if you have any special requests as far as vocal tuning, drum editing, audio repair, etc.
For original productions, rates are typically according to the projected amount of work involved based on your requests and ideas.
For audio and/or video post-production projects, sometimes the rate is hourly, and at other times it is based on the length of your desired final product
Can I use the same files for multiple media formats, therefore saving some cash?
In many cases, the answer is no. But there are exceptions.
For instance, you can use digital masters as CD WAVs, but only if you provided 16-bit pre-masters, and only if your manufacturer doesn't require DDP files.
Do you offer free test masters?
Most of the time, I can't provide free test mixes. Even a 10 second test mix could take 4 or 5 hours to produce, depending on the complexity of your production. If you are working on something in which there are 5 multi-tracks or less, go ahead and drop me a line.
What is mixing and mastering?
Mixing is an incredibly nuanced, multi-dimensional process in which two or more audio recordings are layered together, adjusted in endless ways so that the full experience is cohesive, with each element occupying its own space in the stereo field and frequency spectrum. It is an extremely creative process, but also very technical. It can be relatively time-consuming, and each element impacts each other element, like a building or sculpture.
Mastering is the very last process in the post-production process before the audio is published or put onto physical formats. Mastering optimizes, refines, and sometimes greatly enhances or improves the audio. It not only comes up with the most effective overall parameters for the entire recording, but also focuses in on individual events if anything special is needed. Even the best-mixed records in the world are still mastered with great care, and the worst-mixed records are still improved with a great mastering job.
Mixing and mastering are both about achieving balance, consistency, clarity in different ways. But the audible characteristics are just one side of the job. The other side is getting your project up to par with the required industry standards for file format, bit rate, sample rate, embedded text, and other under-the-hood specs.
What is stem mastering? Can you do it?
Stem mastering is a little bit like mixing, but in a much simpler form, combined with the mastering process. Sometimes artists want to give the mastering engineer just a little bit more control over the music, rather than just having a left and right channel at their disposal. In stem mastering, often the engineer will be able to adjust the level or EQ of the drums, guitars, synths, vocals, or other general groups of elements, entirely separate from the rest.
I do offer stem mastering. Please get in touch for a quote.
Can you edit my podcast?
Absolutely! I regularly edit discussions, interviews, and other audio and video recordings meant for podcast distributors, YouTube, audiobooks, etc. I can also apply titles, transitions, and other basic elements to your footage if you have a video podcast. I'm also able to clean up your picture, as well as filter out various types of artifacts and noise.
How do I pay you?
I will send you an invoice via email reflecting the project you and I will have discussed. It will be a Paypal invoice, but you can use a credit or debit card if you do not want to use a Paypal account.
To start any project you must pay at least 50% of the total as a deposit. You will receive the final product once the total has been fully paid. All deposits are non-refundable.
How do I prepare my files? What kind of files do you require?
For all projects, send the highest quality and resolution version of whatever you're working with. Preferably 24-bit WAV files. 32-bit is okay too, but they will be converted (safely). Try to avoid lossy formats. If another band member or your engineer has higher quality files, please seek them out before beginning your project with me.
Please make sure there are little to no processing on your master buss, especially compression or limiting. If you insist on sending compressed pre-masters to maintain an ideal sound, please consider sending a raw version as well. Too much processing on the master buss will limit what I can do for you, and may greatly hinder my ability to give you the best master possible.
Please make sure your audio files have headroom and do not clip. Do not normalize them. At least 3db of headroom is preferred, but even 0.1db will do.
Any file sharing service is OK. You can also ship a USB drive or data CD.
How will you deliver the final product?
I will send you high quality files that pertain to your intended formats. In most audio jobs, it's WAV files.
I typically use WeTransfer to send you the files because it's so quick and easy. Plus, their art exhibits on the download and upload pages are usually really cool.
For files over 2GB, I will use Google Drive, or something else if needed. If you'd like me to send USB Drives or data CDs in the mail, I can do that for a fee.
Can you produce original music for me, or help me produce my own?
I absolutely can!
I play guitar, bass, drums, keyboards and synthesizers, and I also experiment with altered and repurposed electronics of various kinds. I'm an electronic music producer, and have produced, mixed, and often mastered lengthy, dense compositions in which I've performed or programmed every element.
I have experience in a multitude of genres and musical communities. I've produced pop, R&B, hip hop, industrial, new age, jazz fusion, vaporwave, emo/screamo, black and death metal, noise, grind, folk, drone and ambient, hardcore and post-hardcore, rock and post-rock, punk and post-punk, and even a few country numbers!
I've produced jingles for podcasts and advertisements, instrumentals for rappers and singers, and have contributed production to other artist's unfinished albums.
Please get in touch with your story, and I will give you the full spiel on how I can help you.
Do you master for vinyl?
Mastering for vinyl is quite different from mastering for other formats. There are certain key factors involved, and masters for other formats will likely not properly translate to vinyl without introducing the risk of distortion, needle tracking problems, or other issues.
I lost the files you sent me months ago. Can you resend them?
Of course. I will charge a flat fee of $30/hr (one hour minimum) if I need to download the project from my secure server, uncompress it, extract the file files, and upload them to you. Typically I keep projects on hand for 1-2 months after completion.
Will my music be ready for publishing after mixing or mastering?
Your mixed music should, 100% of the time, be mastered in some capacity. Even if you are just producing a demo entirely on your own, with an intention of only showing your friends, a minimum number of mastering-related tasks should be performed for the sake of eliminating problems from the playback and monitoring experience.
Your mastered music will always be ready for release, but the overall sound quality does depend on the quality of the mixes. As a general rule, mastering will always bring improvement. Though many engineers will not admit it, mastering *can* be used to "fix" (or mask) issues with a problematic mix. However it is always strongly encouraged that these things be taken care of in the mixing stage if possible.
What gear and software do you use?
As much as I love talking gear and plug-ins, I don't list any of it on my website. The sound quality of my work speaks for itself. I do not want to be identified with gear rather than results. I do not keep what I use a secret, but I don't name-drop brands and models as a means for advertising my services. I can assure you that what I use is high-quality, revered in the industry, and more than sufficient for the job. What truly matters is how one uses such resources.
Can I request revisions?
I will honor without protest 3 full rounds of revisions to any project. After that, I charge an hourly rate.
Do you offer classes, tutorials, or mentoring?
I do offer hour blocks of video chat lessons to help you with your mastering, mixing, or original compositions. Please get in touch to discuss.
Can you produce DDP files, PMCDs, or MFiT masters?
Yes, I can provide DDP files for your CD master.
Do I need DDP files or just 16-bit WAVs for my CD master?
That question is for your intended manufacturer. Some services will accept CD WAVs, and others require DDP files. If you are just burning CDs yourself, you only need 16-bit WAVs. DDP files are always recommended for maximum control over things like seamless playback, CD Text, embedded ISRC codes, etc.
Can I change my mix during or after mastering?
You're welcome to change your mix and submit a new one during the mastering process for $25/song or $100/album. This can also be done after the mastering is complete for $40/song or $150/album. In the event your new mix is totally different and the mastering process has to start completely over, I will discount the new job 20%.
What other artists, labels, or organizations have you worked with?
Why do I need to get my music mastered if I am a DIY artist who is not concerned with "industry standards," airplay, Spotify playlists, or anything like that?
I know that position very well. I come from underground DIY punk, noise, and vaporwave scenes. The truth is, even if you don't want to get your music professionally mastered, it should still go through several mastering processes at the bare minimum. I don't know how many homemade tapes and CDrs I've bought from artists like yourself, at basement shows and from small labels, that featured music that was way too quiet, incredibly muddy or muffled, or so loud that I had to turn the volume way down or up to enjoy the music. Unless your intention is "audio terrorism" (which exists, and I frankly like it), you should still have consistent levels and a good frequency balance. Your listeners will appreciate it. YOU will appreciate it.
Will my suffering mix sound better after mastering?
On one hand, yes, definitely. Many engineers will stress very strongly that they are not in the business of "polishing turds." "Shit in, shit out," they say. "The master is only as good as the mix," they say. Well, I don't entirely agree!
What's with the free mixing advice?
If you are interested in getting your album mastered with AMA/V, feel free to send me your works in progress and I can give you some mixing advice, if needed, to help you prepare your songs for mastering.